dalla parte del professionista sanitario
VitroSteril Air
Health Facility Air Purification and Disinfection complete solution.
There are many airborne diseases, from flu to cold, to new and more severe air conditions (COVID-19).
Some environments have more critical issue, such as health care ones.
A lot of hospitals do not adopt any air quality control measures in public places; some are applying mostly traditional air purifiers, without using the new technologies available. The purifiers work independently, without centralized air quality monitoring and control; service and maintenance of the purifiers are challenging tasks too.
Hospital air contamination:
- increases patient morbidity and mortality
- increases the risk to medical staff
- increases healthcare and patient costs
- wastes social resources.
VitroSteril Air meets the different needs of the user with two lines of specialist products:
Plasma Air Sterilisers
Plasma has a sterilizing effect against bacteria much stronger and faster than UV and Ozone; during air sterilization, poisonous gases such as formaldehyde, benzene, ammonia, xylol, cigarette smoke smells and any other type of organic odor are disrupted.
During operation there is no presence of ozone or UV rays that could be harmful to humans; this allows sterilization in the presence of people and 24/7.
VitroSteril Air products adopt modular plasma design, integrated with different purification and disinfection techniques; PM2.5 filtration obtained through the combination of primary filter, central filter, plasma module, Cumulate Clean Mass (CCM) is higher-level P4.
The elimination rate of natural spores and staphylococcus is 99.90%.
The systems are equipped with high-precision air quality detectors that display real-time data; once poor quality is detected, the system automatically starts VitroSteril Air sterilisers to effectively reduce infection, protecting the health of patients and healthcare staff. In addition, the devices can work automatically or manually.
With cloud service, Users are able to capture device operation status, collective air quality data management, remote maintenance management, and remote data download and analysis.
Applications
OT, Infectious Ward, Intensive Care, Neonatal Intensive Care, Therapy Ward, Prescription Room, Convalescent Ward, Inpatient Rooms, CSSD, Laboratories, Pathology Department, Diagnostic Center, Neonatal Pediatrics, etc.
Q 100 AC
Q 100 AC gas plasma air sterilizer is designed for centralized air conditioning systems.
The installation is done on the central air conditioning system, the appliance does not generate any noise and the elimination rate of natural spores and staphylococcus is 99.90%.
Q 100 AC
Q 100
Q 100 plasma gas air sterilizer can be directly applied to the ceiling.
The device does not generate any noise and the rate of elimination of natural spores and staphylococcus is 99.90%.
Q 100
B 100
B 100 air sterilizer model can be applied directly to a wall.
With cloud service, Users are able to capture device operation status, collective air quality data management, remote maintenance management, and remote data download and analysis.
B 100
Y 100
Y 100 plasma gas air sterilizer model is mobile, you can move it freely to different rooms, lowering the costs for sterilizing large surfaces.
The super quiet design, low consumption and low environmental impact allow you to integrate Y 100 in different work environments.
With cloud service, users can monitor operating status, view air quality data, and manage device maintenance.
Y 100
MB 100
MB 100 air sterilizer model uses HEPA filters.
High-efficiency particulate air (HEPA) filters, sometimes referred to as “absolute filters”, can retain 99.999% of particles of 0.3 µm.
Filtering by HEPA filters is not a simple process, but a combination of different mechanisms: inertial impact (especially for > 1 µm at high flow speeds), electrostatic retention (particles 0.5-1 µm) and diffuse retention (particles < 0.5 µm at low speed).
MB 100
SIMQA 100
SIMQA100 is a real-time data recorder that, through a programmed microprocessor, collects environmental data, processes it and sends commands to connected air sterilization or disinfection devices.
This data can be printed or downloaded via cable or WIFI so that it can then be managed as needed.
SIMQA
Air sterilisers with Photocatalytic Oxidation technology
VitroSteril Air offers a viable alternative to passive air sterilization technologies, which require air to pass through electronic filters and purifiers.
Photocatalytic Oxidation Technology Air Sterilisers sanitize environments and surfaces from bacteria, corona virus, VOC, reduces fumes, odors, pathogenic microorganisms such as dust mites. Ultraviolet light radiates a nanostructured titanium dioxide alloy, giving rise to the photocatalytic effect: the air water vapor, in contact or near the surface, turns into plasma, composed of hydrogen peroxide (oxygenated water) and oxidizing radicals, with oxidizing effect.
The transformed air, entered into the environment enriched by oxidizing agents, becomes an effective continuous sanitizing fluid and biodecontaminating that acts in a few hours destroying the microorganisms contained in the rooms and on all the surfaces with which it comes into contact, including the most hidden otherwise unreachable.
When the air, rich in oxidizing plasma generated by Photocatalytic Oxidation technology, reaches surfaces, it continues to work constantly ensuring the results of cleaning even after the evaporation of detergents and disinfectants; this happens inside the ducts and on almost all touchable surfaces (tables and counters, bathroom tiles, door handles, etc.), helping to create and maintain a healthier environment and a more lasting cleanliness.
VitroSteril Air photocatalytic reactors are installed above or directly in the air treatment device, or autonomously; there are no contraindications for humans and the environment as there are no harmful residues, nor does ventilation need before access.
Applications
Residences, hospitals, laboratories, offices, hotels, industry, food industry, ambulances, transport etc.
AS 200
AS 200 Desk Device uses Photocatalytic Oxidation Technology, also activates the production of Ozono and is equipped with an effective HEPA filter and an adjustable fan.
AS 200 is a model indicated for apartments, offices, schools, hotels, commercial spaces, cars, motorhomes, taxis, buses, trains, boats, gyms etc., to break down 24 hours a day bacteria, virus, VOC, mold, smells, smoke, mites, etc.
Coverage is about 100 cubic meters.
AS 200
A 500
A 500 Photocatalytic Oxidation Technology Filter is a model for apartments, offices, bus/train, hotels with existing pipes, to break down 24 hours a day bacteria, corona virus, VOC, mold, odors, smoke, mites, etc. It does not produce ozone.
Low-power system, installed in air ducts and air conditioners of the type split or fan coils, totally concealable, requires minimal maintenance.
Coverage is for rooms up to 25 square meters, 70 cubic meters.
A 500
Product Line A 2000 / 5000 / 10000
Photocatalytic Oxidation Technology Line A Filters are models for private and public spaces with existing pipelines, to break down 24 hours a day bacteria, corona virus, VOC, mold, odors, smoke, mites, etc.
System installed in the pipelines, requires minimal maintenance, and no cleaning is required.
Different models are available depending on the areas of the rooms and the cover is for spaces up to 500 square meters, 1.400 cubic meters.
They do not produce ozone.
Line A